John Deere Bulldozer Lift Cylinder in Ohio - Our firm offers a wide selection of various aftermarket accessories and parts for many brands of excavators, loaders, and bulldozers. We have built our international reputation through tremendous customer service.
Taylor Machine Works' has a completely dependable line of loaded container handlers. Their strong reputation has expanded with the introduction of the TXLC Series Loaded Container Handlers. The TXLC Series loaded handlers offer a much more stable platform due to anchoring the tilt cylinders to the counter-weight. This location is much farther back than previous units.
Each one of the newly made units within the TXLC line offers the addition of Taylor Integrated Control System or TICS. This system can diagnose and integrate vital system components. Many businesses and companies continue to rely on Taylor products thanks in part to their offering the lowest complete operating expense in the material handling industry.
With a rated load capacity of 90,000 pounds in the 2nd and 1st tiers, the TXLC-974 also provides eighty five thousand pounds load capacity in the 4th and 3rd tiers. These units offer a 97 inch center of load. When at 106 inch center of the load, the TXLC-974 capacity is eighty two thousand pounds in the 1st and 2nd tiers and in the 3rd and 4th tiers it is still rated at eighty thousand pounds. Taylor Machine Works' is truly proud of this new heavy-duty addition to their rapidly growing family.
The TXTCP Series by Taylor Machine Works' is a complete testament to the company's design and engineering capabilities. This series is made to deal with ISO, WTP and Pin-type containers. Also, they can deal with loaded intermodal trailers. The TXTCP-900 is additionally well suited to rail car terminals. At present, the TXTCP-900 is the most versatile machine within the business and there are no others that truly come close.
Ferwerda-Werba-Ferwerda was a Cleveland, Ohio based construction business which experienced this particular dilemma first hand. Koop and Ray Ferwerda were brothers who had relocated from the Netherlands. They were partners in the business which had become one of the major highway contractors in the state of Ohio. The Ferwerdas' set out to build an equipment that will save both their business and their livelihoods by making a model which will do what had before been physical slope work. This invention was to offset the gap left in the workplace when a lot of men had joined the military.
The initial apparatus these brothers invented had 2 beams set on a rotating platform and was connected directly onto the top of a truck. They used a telescopic cylinder to move the beams in and out. This enabled the attached blade at the end of the beams to pull or push dirt.
The Ferwerda brothers improved on their first design by making a triangular boom to produce more strength. Then, they added a tilt cylinder that enabled the boom to rotate forty-five degrees in either direction. This new unit can be outfitted with either a bucket or a blade and the attachment movement was made possible by placing a cylinder at the back of the boom. This design powered a long push rod and allowed much work to be done.
