Bulldozer Seat in Ohio - Our firm offers a whole range of different aftermarket accessories and parts for all brands of excavators, loaders, and bulldozers. Our highly trained Ohio team of parts specialists are standing by to help you identify the parts you're after.
Forklifts powered by propane are common in warehouse settings. These forklifts have a propane mount situated behind the driver. These tanks have to be replaced from time to time because they have limited lifespans. Forklift drivers must use caution when handling propane tanks. Compressed gases are hazardous, particularly since the gas is flammable. Utilize care when replacing and removing propane tank to prevent injury.
1 To change a propane tank, first stop the forklift while leaving the engine running, and turn the valve on the tank off. Let the forklift run until the engine dies. This process burns the gas off in the transfer hose that connects the tank and the engine. Before taking the second steps, put on the proper safety equipment, such as insulated gloves made of either neoprene or leather. It is essential for you to protect your skin from contact with the compressed gas, which is very cold.
2 The hose of the tank needs to be disconnected, followed by removing the tank from its holding straps. When you put in a new tank, reconnect the holding straps and reconnect the hose at the valve of the tank by tightening the nut.
3 Leaks could be checked just by applying soapy water to the valve and slightly opening it. If there is a leak, it will cause bubbles to foam from around the valve. If this happens, check the valve area and the connection hose at the nut. Re-tighten the connecting nut if you detect any leaks in the area of the valve, and afterward do the leak checking process again. Persistent leaks mean that the nut and connecting hose would have to be replaced. Then again, if replacing the hose and nut still does not stop the leak, the tank must be replaced.
4 Open the valve all the way to enable the gas to fill the connecting hose. After that you can start the forklift and resume operating.
Ever since 2011, the Linden Comansa company has offered its clients the LC 1600 series tower cranes. This series includes the models: 16 LC 185, 16 LC 260 and 16 LC 220. These models are available in various versions of maximum load. The design of the LC 1600 series enables Comansa to keep their fundamental premises, such as easiness of transport and assembly and modularity.
The series provides a load capacity between 8 and 12 tons, placing between the 5 to 8 ton capacity of the LC1100 and the 12 to forty eight ton LC2100 model. In addition, the LC1600 family brings together the benefits of both series that shares a variety of factors.
The family of tower cranes which has been engineered with every advantage known and proved by Linden Comansa's Flat-Top modular system is the LC 2100. This series includes a lot of innovations in the particular machinery.
There are 4 Flat-Top cranes in the LC 2100 series. These cranes have the denominations of 21 LC 550, 21 LC 400 and the 21 LC 290. The latest addition to the series is the 21 LC 750. The 21 LC 750 crane is the largest in the series. It is outfitted with 7 tons of jib-end load and eighty meters of jib length. This tower crane provides a maximum load of forty eight tons.
The LC3000 series by Comansa is formed by 2 models: the 30 LC 1100 and the 30 LC 1400. These two models are also in 3 different versions with different load capacities. The ranges of load capacities are ten thousand five hundred fifty; one hundred five thousand eight hundred twenty and 141,090 lbs. or thirty two, forty eight and 64 tons. The largest Flat-Top tower cranes have been designed mainly for public works, heavy industry, mining and construction applications.
Linden Comansa has been manufacturing large capacity cranes for lots of years. Since designing this series, the overall production and delivery timeframes are presently much shorter. The business has maintained highly competitive pricing for their machinery.
